Preparation for Full Assembly and Production

Following our presentation, there were a few issues that needed to be addressed. The drawings needed small alterations based on the materials we will be using. Spacing was changed slightly due to the sheet metal being in customary units rather than the metric we designed for (0.25 in vs 3 mm). Another change was moving the lower passive wheels down slightly as to accommodate the change in track sizing.

With these changes, the designs are ready for other teams to incorporate their parts into the bogey. The files have been available for the last few weeks but now the track CAD is complete as well and ready for assembly.



Comments

Post a Comment

Popular posts from this blog

Final Production and Presentation Prep

Image
The last 2 weeks were spent assembling our drive bogie. Brandon and I spent a little over 40 hours between fitting, filing, boring, and welding the components through the weeks. Due to changing from metric to customary for assembly, there were some tolerance issues which required fixing with filing. The drive bogie turned out very well as shown below. The bogie is currently at Superway to have other teams integrate their systems. There was a slight issue with the alignment of the axle for the motor team. This was caused by shifting or warping of parts during welding and will be resolved by increasing the hole size by milling. Also, after speaking with guideway team, we have decided to shelve route selection for this year. Their third rail would not be ready in time and we would require having parts machined. In addition to preparing for the Senior Project presentations on May 10th, Dr Furman requested that the Bogie Integration attend the SJSU Mechanical Engineering Alumni Event. We
Read more

First Team Meeting

During our first meeting, I joined the Full-Scale Bogie team. The team spoke with previous team members about what improvements are to be made and what needs to be created from scratch. We subdivided our team into groups focusing on individual sections of the bogie. I am working on the Bogie and Guideway Interface. We are designing the method of suspension and fit for the bogie. We will be collaborating with the Guideway Team closely  to ensure a successful design with a smooth ride.
Read more

Manufacturing and a Slight Change to Superway

This week consisted mostly of playing the waiting game. Our designs are finished and now include the sizing of the last components we needed from other teams. Myself and my teammate, Brandon Tarter, will be going to SJSU Makers' Space on Tuesday April 9th to get trained and cleared to use the waterjet and make our parts. Hopefully, we will be able to make our cuts on the same day. It was recently discovered that the motors purchased by the Motor Team are unidirectional, meaning the current design for Maker Faire will not be able to operate and return to it's starting position autonomously. To rectify this, Motor Team, with our help, will be reinstalling the old motor to the slave bogie for reverse drive only. This complicates the project for everyone involved, but we feel this the least disruptive way to solve the issue.
Read more