Week 8: Drive Bogie V2

This week was spent refining the drive bogie design to a more concrete idea. This version still requires a set of lower clamping wheels but represents a our vision for the drive bogie.  The Drive bogie is meant to be a small bogie with the sole purpose of propulsion. This bogie will be very lightweight and will not be load bearing. This bogie will allow the slave bogie to be more simplistic and used to carry more components. The next step for the coming weeks is to finish the drive bogie design and modify bogies from previous years for use as a slave bogie. From there, we will perform FEA to ensure the designs can handle their intended loads.

Below is a picture of the current drive bogie iteration without wheels:

Comments

Post a Comment

Popular posts from this blog

Final Production and Presentation Prep

Image
The last 2 weeks were spent assembling our drive bogie. Brandon and I spent a little over 40 hours between fitting, filing, boring, and welding the components through the weeks. Due to changing from metric to customary for assembly, there were some tolerance issues which required fixing with filing. The drive bogie turned out very well as shown below. The bogie is currently at Superway to have other teams integrate their systems. There was a slight issue with the alignment of the axle for the motor team. This was caused by shifting or warping of parts during welding and will be resolved by increasing the hole size by milling. Also, after speaking with guideway team, we have decided to shelve route selection for this year. Their third rail would not be ready in time and we would require having parts machined. In addition to preparing for the Senior Project presentations on May 10th, Dr Furman requested that the Bogie Integration attend the SJSU Mechanical Engineering Alumni Event. We ...
Read more

First Post

Image
I'm Nikolas Mifsud. I am a Mechanical Engineering major focusing in Mechanical Design. I am set to graduate in December of 2019. I am passionate about cars and the automotive industry and follow the computer hardware sector closely. I play Ultimate Frisbee on the SJSU Club Team. The Spartan Superway approaches the issue of transportation in a unique and, I think, very viable way. I would like to be a part of and do my best to assist in advancing the project.
Read more

Week 6: Presentation 1

This week, we gave out first major presentation. This was the first time of the groups outside of Full-Scale heard about our intention to change to the 2-bogie system. As such, there were quite a few questions regarding its advantages and how we planned to implement it. This week forward is where our work really begins. We are currently creating sketches of the bogies before getting a reference CAD model created.
Read more